Alaska Satellite Facility - Distributed Active Archive Center

ALOS PALSAR – Radiometric Terrain Correction

ASF’s Radiometric Terrain Correction Project

The creation of radiometric terrain corrected (RTC) products was a project of the Alaska Satellite Facility to make SAR data accessible to a broader community of users. RTC removes the geometric and radiometric distortions inherent in synthetic aperture radar (SAR) and the corrected PALSAR data are provided in a GIS-compatible GeoTIFF format.

The release of ALOS PALSAR RTC products commenced in October 2014 and was completed a year later. Data used in the RTC project were Fine Beam (FBS, FBD) and Polarimetric (PLR) scenes over all global land areas except Antarctica, Greenland, Iceland, and northern Eurasia.

Extent and concentration of processed RTC scenes by beam mode
TotalFBSFBDPLR
Total Extent and Concentration of of processed RTC scenes.Heat Map of FBS Extent of Processed RTC scenes. Extent and concentration of processed RTC scenes.Heat Map of FBD Extent of Processed RTC scenes. Extent and concentration of processed RTC scenes. Heat Map of PLR Extent of Processed RTC scenes. Extent and concentration of processed RTC scenes.

 

NASA-logo
Logo of JAXA | Japan Aerospace Exploration Agency

Overview of ALOS PALSAR RTC

RTC Properties

 

Dataset PropertyHigh Resolution (RT1)Low Resolution (RT2)
Temporal Coverage2006-20112006-2011
Pixel spacing12.5 meter30 meter
LicenseSee License and Data Citation tabSee License and Data Citation tab
Download infoData DiscoveryData Discovery
File format GeoTIFF GeoTIFF
Browse image formatGeoJPEG 1000 x 1000 pixelsGeoJPEG 1000 x 1000 pixels
Pixel valuesGamma nought power in 32-bit floating point formatGamma nought power in 32-bit floating point format
Files included in the package

  • Incidence Angle GeoTIFF, indicating the angle in radians for each pixel

  • Layover/Shadow GeoTIFF, indicating where processing was impacted by layover or shadow

  • Browse image in GeoJPEG format 1000 x 1000 pixels

  • KMZ file with 30-m overlay

  • Metadata in ISO 19115 format (xml file)

  • Modified SRTM or NED DEM used for RTC processing in GeoTIFF format


  • Incidence Angle GeoTIFF, indicating the angle in radians for each pixel

  • Layover/Shadow GeoTIFF, indicating where processing was impacted by layover or shadow

  • Browse image in GeoJPEG format 1000 x 1000 pixels

  • KMZ file with 30-m overlay

  • Metadata in ISO 19115 format (xml file)

  • Modified SRTM or NED DEM used for RTC processing in GeoTIFF format

ProviderJapan Aerospace Exploration Agency (JAXA).Japan Aerospace Exploration Agency (JAXA).
Date published:20142014

NOTES

Expand the sections below to view content.  Access the full content on a single page by clicking the button.

ALOS PALSAR RTC User Guide/Technical Information

RTC Documentation

ALOS PALSAR RTC Documentation

 

NameDescription
RTC Product Guide (2015)Guide for radiometrically terrain-corrected products.
RTC Product Specification (2014)This product format specification defines standard terrain-corrected products generated at ASF. It contains the definition for the ISO-compliant XML metadata.
RTC ATBD (2015)Algorithm Theoretical Basis Document: Provides the theoretical background of the algorithms and processing flows used for the generation of terrain-corrected products processed by ASF.
RTC Image Corrections

Radiometric Correction

 

Radiometric correction involves removing the influence of topography on radar backscatter values. For example, radiometric correction removes the exaggerated brightness caused by radar reflection from steep ground surfaces facing the satellite or aircraft.

 

Terrain Correction

 

Terrain correction is correcting geometric distortions introduced by side-looking radar imaging that lead to geolocation errors. These distortions are compounded by rugged terrain. Terrain correction moves image pixels into the proper spatial relationship with each other and the ground. Mountains that look like they have fallen toward the sensor are repositioned to their correct shape and geolocation.

Correction of geometric distortion is sometimes called orthorectification, most commonly used when referring to optical imagery.

 

Radiometric Terrain Correction

 

Radiometric terrain correction combines both corrections to produce a superior product for science applications.

 

Modified RTC DEM Information and Disclaimer

PALSAR RTC DEM Information and Disclaimer

 

The Digital Elevation Model (DEM) file in the ALOS PALSAR Terrain Corrected product package is not generated from the PALSAR data. It is a copy of an existing DEM modified and used for the radiometric terrain correction process. The pixel spacing of the source DEM was adjusted to match that of the Terrain Corrected image it is packaged with and does not indicate the DEM’s resolution.

The source DEMs used for the ALOS PALSAR Terrain Corrected products are from either the Shuttle Radar Topography Mission (SRTM) or the National Elevation Dataset (NED). Refer to the table and map in the section About the source DEMs used for ALOS PALSAR RTC processing to determine the native resolution and spatial coverage of the source DEMs used for the project.

The source-DEM tiles needed to cover the spatial extents of an uncorrected PALSAR scene were downloaded and mosaicked into a single DEM raster. This mosaicked DEM was processed to apply a geoid correction (see Fig. 1) and then resampled to match the output pixel spacing of the PALSAR scene.

The DEM files packaged with the RTC products are only intended to be used as a reference for evaluating the radiometric terrain correction process. They should not be used in place of a regular DEM, as the geoid correction in preparation for RTC processing alters the elevation values.

 

Elipsoid, Orthometric, and Geoid heghts relationshipFigure 1. Most DEMs are geoid-based and require a conversion before they can be used for terrain correction. The DEM included with an ASF RTC product was converted from the orthometric height of the source DEM to ellipsoid height using the ASF MapReady geoid_adjust tool. This tool applies a geoid correction so that the resulting DEM relates to the ellipsoid.

The GeoidEval Utility is a free online tool that computes the height of the geoid above the WGS84 ellipsoid at a specific location and will show the correction applied to the source DEM used in creating an RTC product.

 

 

About the source DEMs used for ALOS PALSAR RTC processing

About the source DEMs used for ALOS PALSAR RTC processing

 

The quality of an ALOS PALSAR RTC product is directly related to the quality of the digital elevation model (DEM) used in the radiometric terrain correction (RTC) process. The map indicates which DEM was used in a given location, and the table below summarizes the various DEM sources.

World map showing where different source DEMs were used.

The continental U.S. (CONUS), Hawaii, and parts of Alaska are covered with a 1⁄3 arc-second National Elevation Dataset (NED) at a 10 m resolution. The rest of Alaska above 60 degrees north latitude was only available at 60 m resolution with two arc-second NED data. One arc-second NED provided the best resolution for Canada and Mexico at 30 m. The Shuttle Radar Topography Mission (SRTM) GL1 data at one arc-second (30 m) resolution was used for the remaining globe. Greenland and Antarctica, mostly covered by ice and glaciers, were not terrain or radiometrically corrected. No suitable DEMs were available for areas in Eurasia above 60 degrees north latitude.

ASF pre-processed the DEMs to a consistent raster format (GeoTIFF) from the source formats: height (*.hgt), ESRI ArcGrid (*.adf), etc. Many NASA-provided DEMs were provided as orthometric heights with EGM96 vertical datum. These were converted to ellipsoid heights using the ASF MapReady tool named geoid_adjust. The pixel reference varied from the center (pixel as point) to a corner (pixel as area). The GAMMA software, used to generate the terrain-corrected products, uses pixels as area and adjusts DEM coordinates as needed. Where more than one DEM was available, the best-resolution DEM was processed. Complete DEM coverage from a single DEM source was a requirement for processing to proceed.

 

DEMs used for ALOS PALSAR RTC processing
NameDatumSpatial CoverageDEM Resolution
NED13NAVD88CONUS, Hawaii, parts of Alaska~10m (1/3 arc sec)
SRTMGL1EGM96Latitudes between 60 N and 57 S degrees~30 m (1 arc sec)
SRTMUS1EGM96CONUS, Hawaii, parts of Alaska~30 m (1 arc sec)
NED1NAVD88CONUS, Hawaii, parts of Alaska, Canada, Mexico~30 m (1 arc sec)
NED2NAVD88Alaska~60 m (2 arc sec)
PALSAR RTC and Landsat 8 Fusion

PALSAR RTC and Landsat 8 Fusion

 

PALSAR RTC and Landsat products can be used as complementary or fusion products for biomass estimation, biodiversity assessment, and forest mapping and monitoring. The ASF RTC product provides researchers with an off-the-shelf match to Landsat 8, an orthorectified optical product.

The images below demonstrate the compatibility between PALSAR RTC and Landsat 8. The first image shows the lack of feature alignment in an uncorrected PALSAR L1.5 image combined with a Landsat 8 image. The second image, a fusion of RTC and Landsat 8, shows an excellent match.

 

Uncorrected PALSAR and Landsat 8PALSAR RTC and Landsat 8
Note the lack of image coherenceImages now align closely

ALOS PALSAR RTC Products

RTC Product Files

 

File TypeDescription
RTC GeoTIFF (.tif)• One file for each polarization
• Pixel values are gamma nought power in 32-bit floating point format
• Pixel spacing is 12.5 m for high-resolution (RT1) and 30 m for low-resolution (RT2) products
Incidence Angle GeoTIFF (.tif)• Pixel spacing the same as the RTC GeoTIFF
Layover/Shadow GeoTIFF (.tif)• indicating where processing was impacted by layover or shadow
• Pixel spacing the same as the RTC GeoTIFF
Modified DEM GeoTIFF (.tif)• Best resolution SRTM or NED source DEM available, with geoid correction applied
• Pixel spacing the same as RTC GeoTIFF
• Technical information is available in RTC Product Guide and ATBD
Browse image GeoJPEG (.geo.jpg)• 1000 x 1000 pixels
• Color images available for FBD and PLR beam modes
Metadata (.xml)• ISO 19115 format
KMZ (.kmz)• 30-m overlay

 

NOTE: More information on the DEMs used for RTC processing can be found on the PALSAR RTC DEM Disclaimer page.

License and Data Citation

ALOS PALSAR RTC Product License Agreement

 

The Alaska Satellite Facility (ASF) grants the End User use of Radiometrically Terrain Corrected (RTC) Advanced Land Observing Satellite (ALOS) PALSAR data if the End User accepts and agrees to the following ALOS PALSAR RTC End User License Agreement. The End User will be deemed to have accepted and agreed to the terms and conditions if the End User starts using ALOS PALSAR RTC data including but not limited to downloading, installing, manipulation or other action.

Section 1 Definitions

1. “End User” means the person, legal business entity, public entity or any other legal entity who obtains the Product and is considered to have accepted this End User License Agreement. In the case of a public entity, the End User is deemed to be only the part, division, etc. of the public entity located at the address to which the Product is supplied, unless otherwise agreed upon by ASF in writing and in advance.

Value Added Product (VAP) – A modified Standard or Derivative Work Product with high-level processing that cannot be converted back to the original product. The high-level processing includes data analysis or combining multiple-satellite data, image processing based on external information, and physical quantity conversion.

2. “Product” means any ALOS RTC satellite data product supplied by ASF. Product is classified as Value Added Product (VAP). Definition of the product types is shown below.

3. “JAXA” means the Japan Aerospace Exploration Agency.

4. “METI” means the Japanese Ministry of Economy, Trade, and Industry.

5. “Related Parties” means the parties that have been involved in the creation, production, distribution or delivery of the Product.

Section 2 Permitted Uses

These data are provided in accordance with NASA’s free and open data policy. There are no restrictions on their use.

Section 3 Prohibited Uses

1. The End User shall not delete, obscure, remove or alter any copyright notice that is contained in or appears on the Product.

Section 4 Intellectual Property Right and Copyright Notice

1. The End user confirms that NASA retains the copyright to the ALOS PALSAR RTC products and that JAXA/METI retains the copyright to the original data from which the Product was derived.

2. The End User owns all intellectual property rights, including copyrights, which result from the End User’s act of interpretation, adaptation, authorship or any other work on the Product resulting in the creation of another VAP. All VAP products must be accompanied by the appropriate copyright notice.

3. The End User agrees that any embodiment of the Product permitted under this agreement shall contain the following copyright notice. The copyright notice shall be prominently displayed and the [Year] field correctly filled with a numerical value corresponding to the year of raw data acquisition.

Copyright Notice for ALOS PALSAR RTC: © NASA [Year], Includes Material © JAXA, METI [Year]

Section 5 Limited Warranty – Disclaimer

1. Neither ASF nor the Related Parties, if any, warrants that the Product is free of bugs, errors, defects or omissions.

2. The Product is provided as is with no warranty of merchantability or fitness for a particular purpose.

3. ASF and the Related Parties shall have no liability to the End User for any damage suffered by the End User or any third party, as a result of using ALOS PALSAR RTC products. This damage is including but not limited to consequential loss and lost earnings.

Section 6 Modification of this Agreement

ASF reserves the right to modify this agreement if necessary and the modified agreement will govern. In the case of modification ASF will announce on ASF internet site.

Section 7 Governing Law and Jurisdiction

This End User License Agreement shall be governed by the laws of the United States of America.

 


Citing ALOS PALSAR RTC Data and Images

 

DescriptionFormatExample
PALSAR RTC DataDataset: ASF DAAC [year created], [dataset name]; Includes Material ©JAXA/METI [year of data acquisition]ASF DAAC 2015, ALOS PALSAR_Radiometric_Terrain_Corrected_low_res; Includes Material ©JAXA/METI 2007.
PALSAR RTC Images©JAXA/METI [year of data acquisition]©JAXA/METI 2007
PALSAR RTC DOI (high-resolution)https://doi.org/10.5067/Z97HFCNKR6VA
PALSAR RTC DOI (low-resolution)https://doi.org/10.5067/JBYK3J6HFSVF

Discover ALOS PALSAR RTC data

ALOS PALSAR RTC data are open data and may be downloaded using these ASF and NASA Discovery services:

Data Discovery Tools

Data Discovery ToolLink
ASF Vertex Data SearchVertex
Python Search Moduleasf_search
ASF Search APIASF Search API
NASA Earthdata SearchEarthdata Search