Alaska Satellite Facility - Distributed Active Archive Center

Sentinel-1

Sentinel-1 Satellite in space artist rendering

NASA’s provision of the complete ESA Sentinel-1 synthetic aperture radar (SAR) data archive through the ASF DAAC is by agreement between the U.S. State Department and the European Commission (EC). As part of the Earth-observation Copernicus program, the Sentinel mission will provide scientists with accurate, timely, and easily accessible information to help shape the future of our planet. Content on ASF’s Sentinel web pages is adapted from the ESA Sentinel-1 website.

European_Space_Agency_logo.svg
NASA-logo

Overview & FAQ

The Sentinels are a fleet of European Space Agency (ESA) satellites designed to acquire measurements from multiple sensor types that will provide information necessary to meet Europe’s Copernicus program objectives.

The first mission in the series, the Sentinel-1 constellation, includes twin satellites that each carry C-band synthetic aperture radar (SAR) and together provide all-weather, day-and-night imagery of Earth’s surface.

Sentinel-1A was launched on 3 April 2014, and Sentinel-1B on 25 April 2016. They orbit 180° apart, together imaging the Earth every six days.

 

  • In December 2021, an anomaly in the power supply of Sentinel-1B caused the SAR sensor to stop working. Attempts to restore power to the sensor failed, and the mission officially ended on August 3, 2022.

 

Dataset PropertyStrip Map (SM) modeInterferometric Wide (IW) modeExtra Wide (EW) modeWave (WV) mode
Temporal Coverage12 Days12 Days12 Days12 Days
Spatial CoverageGlobalGlobalGlobalGlobal
Center FrequencyC-band at 5.405 GHzC-band at 5.405 GHzC-band at 5.405 GHzC-band at 5.405 GHz
PolarizationSingle Polarization (HH or VV)
Dual Polarization (HH+HV or VV+VH)
Single Polarization (HH or VV)
Dual Polarization (HH+HV or VV+VH)
Single Polarization (HH or VV)
Dual Polarization (HH+HV or VV+VH)
Single Polarization (HH or VV)
Dual Polarization (HH+HV or VV+VH)
Spatial Resolution5 x 5 m5 x 20 m20 x 40 m5 x 5 m
Swath Width80 km250 km
410 km100 km
Off-Nadir Angle18.3° to 46.8°29.1° to 46.0°18.9° to 47.0°21.6° to 45.1° and 34.8° to 38.0°
Download infoData DiscoveryData DiscoveryData DiscoveryData Discovery
File formatSAFESAFESAFESAFE
ProviderEuropean Space AgencyEuropean Space AgencyEuropean Space AgencyEuropean Space Agency
Date published:2014201420142014

 

The loss of one of the Sentinel-1 satellites means that the frequency of observations and global coverage will be significantly reduced until the launch and commissioning of Sentinel-1C. This is predicted to be completed in the third quarter of 2023. Sentinel-1B will be deorbited at this time.
The Sentinel-1 constellation benefits numerous services, such as monitoring of Arctic sea-ice extent, routine sea-ice mapping, and surveillance of the marine environment. Applications include oil-spill monitoring and ship detection for maritime security; monitoring land-surface for motion risks; mapping for forest, water, and soil management; and mapping to support humanitarian aid and crisis situations.

Updated August 22, 2022

 

International Collaboration

Sentinel-1 is the result of close collaboration among ESA, the European Commission, industry, service providers, and data users.

NASA’s provision of the complete ESA Sentinel-1 SAR data archive through the ASF DAAC is by agreement between the U.S. State Department and the European Commission (EC). As part of the Earth-observation Copernicus program, the Sentinel mission will provide scientists with accurate, timely, and easily accessible information to help shape the future of our planet.

Content on ASF’s Sentinel web pages is adapted from ESA’s Sentinel website.

 

FAQ

 

QuestionAnswer
What are the Sentinel-1 product types, and how are the data processed?Sentinel-1 data products acquired in Stripmap, Interferometric Wide Swath, and Extra Wide Swath modes, generated by the Payload Data Ground Station, are distributed at three levels of processing: Level-0 (called RAW) , Level-1, and Level-2
Level-1 products can be one of two product types — either Single Look Complex (SLC) or Ground Range Detected (GRD). Level-2 Ocean (OCN) products can have different components available depending on the acquisition mode. Products are designated based on their acquisition mode, product type and, in the case of Level-1 GRD, resolution. All products are processed directly from the Level-0 product. Each mode can potentially generate Level-1 SLC, Level-1 GRD and Level-2 Ocean products. For Wave (WV) mode, the Level-0 and Level-1 products are not distributed. Level-2 Ocean Swell Spectra (OSW) component is not available from the TOPSAR modes.

Learn about TOPSAR in the “Instrument” section under the “User Guide/Technical Information” tab.
What are the different Sentinel-1 beam modes?Sentinel-1 satellites carry a C-band SAR instrument to provide a combined all-weather, day-and-night supply of imagery of Earth’s surface every six days. The four SAR modes — described in more detail in the “Image Quality” section under the “User Guide Technical Information” tab — are Extra Wide Swath, Interferometric Wide Swath, Stripmap, and Wave.
What is the naming convention for Sentinel-1 data?The naming convention is explained in the graphic below.

I managed to get some Sentinel-1 files in the download queue, and I downloaded the .metalink, but I wasn’t able to download anything after opening the free download manager. Please advise.You must be logged in to Vertex in order to download Sentinel-1 data from ASF.  If you don’t already have a user account at ASF, please create one on Earthdata.
Is there a way to sort Sentinel-1 data in Vertex based on polarization, data type, etc.?To filter by data product, use the drop-down menu titled at the bottom of the results column. Use the menu to select only those products you want added to your download queue. The bar, at the top of the results column, lets you filter your results by typing in keywords displayed in the granule description, such as path or flight direction. For more detailed sorting, use the and features, and add the results to your download queue. Click the button, and import the resulting file into a spreadsheet. Use the tools in your spreadsheet to sort the metadata — for example, by polarization. Copy and paste the resulting granule names into the window to the left of the map and click. Find additional Vertex help through the tab at the top left of the page.
Can I search for Sentinel-1 data over specific areas?Use the geographic search option in the Vertex Data Portal to identify your area of interest and download Sentinel-1 products available from ASF DAAC.
How are Sentinel-1 data formatted?Sentinel-1 data products are distributed using a Sentinel-specific variation of the Standard Archive Format for Europe (SAFE) format specification. The SAFE format has been designed to act as a common format for archiving and conveying data within ESA Earth Observation archiving facilities. The format wraps a folder containing image data in a binary data format and product metadata in XML. This flexibility allows the format to be scalable enough to represent all levels of Sentinel-1 products. A Sentinel-1 product refers to a directory folder that contains a collection of information. It includes:
  • a ‘manifest.safe’ file which holds the general product information in XML
  • subfolders for measurement datasets containing image data in various binary formats
  • a preview folder containing ‘quicklooks’ in PNG format, Google Earth overlays in KML format and HTML preview files
  • an annotation folder containing the product metadata in XML as well as calibration data
  • a support folder containing the XML schemes describing the product XML.
  • Also see SAR Product Formatting on the ESA website.
Why is the Sentinel-1 file I downloaded failing with a “path too long” error?The default Windows file extraction utility will often fail because of long Sentinel-1 filenames. The open-source utility 7-Zip can be used to extract the .zip files downloaded from ASF and ESA.
Why are there stripes running across my Sentinel-1 EW and IW images?These beam modes incorporate an acquisition technique (TOPSAR) that produces wide swaths from multiple sub-swaths, or bands, acquired in the direction the satellite is moving. This can create “seams” that are more noticeable in cross-polarized images (HV and VH). IW is acquired using three sub-swaths and EW five sub-swaths. Find more information in the “Instrument” and “Image Quality” sections under the “User Guide/Technical Information” tab.
Why do some Sentinel-1 images have stepped ends?
Stepped ends, as in the image to the right, are an artifact of the multi-beam scanning technology of TOPSAR and the way that ESA “slices” a data take into discrete, manageable units. See the “Image Quality” section under the “User Guide Technical Information” tab.
Why are some thumbnails and browse images in color and some in grayscale?Single polarization (HH, VV) images are in grayscale, while dual polarization (HH/HV, VV/VH) images have had color assigned to each polarization channel.
Why doesn’t the Sentinel-1 browse image always orient the same direction as the granule outline rendered on the Vertex map?The Sentinel-1A browse is a geocoded jpeg image displayed in a polar stereo map projection at latitudes above 65° north and south. The Vertex map always displays a granule in a Mercator projection. The browse image below is also an example of stepping (question #10). For more information on image artifacts and anomalies see the “Image Quality” section under the “User Guide/Technical Information” tab.

Why are there differences in Sentinel-1 image size between granules in the same beam mode, same swath?The European Space Agency (ESA) uses slices instead of frames to divide a Sentinel-1 datatake into more manageable units, without any overlap or duplicated lines between slices. Stripmap and Interferometric Wide Swath slices consist of approximately 25 seconds of acquisition, and Extra Wide Swath slices consist of approximately 60 seconds. Each band within a product slice is kept to under 2 GB in size. Depending on the terrain being imaged, slices in the same datatake can have different dimensions in the azimuth direction. Find more information in the “Image Quality” section under the “User Guide/Technical Information” tab.
Why does the Alaska Satellite Facility (ASF) use frames for Sentinel-1 data when the European Space Agency (ESA) does not?ASF DAAC assigns frames to Sentinel-1 product slices that refer to the same point temporally and geographically. In Vertex, search results then display all the products available over a point and time instead of listing the products for the same point individually. For example, a single Sentinel-1 slice can produce RAW, SLC, GRD and OCN products. ASF DAAC uses the internally generated frame number to group these products into a single Vertex search result and to create InSAR stacks or stacks used to color code Vertex results on the map to indicate approximate quantity of repeating observations with the same relative orbit and frame number.
Why does ESA have some Sentinel-1 data products that are missing from ASF?This situation can happen when ESA just released new data and ASF DAAC is still waiting to get the product, or when ESA has processed a scene multiple times. In the latter case, ASF DAAC only keeps the most recent copy of each product type, but ESA may keep older copies available for distribution. If you have a specific product that does not seem to fit either of these two possibilities, please contact ASF DAAC through [email protected].
Why do some of the Sentinel-1 granules in my Vertex search results have no thumbnail and browse images?ASF DAAC generates thumbnail and browse images from the geocoded GRD product produced by the European Space Agency (ESA). If a granule in Vertex is missing a thumbnail and browse image, ASF has not received the GRD product yet, and only RAW, SLC or OCN products are currently available to download.
Note: OCN (Wave mode) products never have browse or thumbnail images available.
Can I request Sentinel-1 data acquisitions from the European Space Agency (ESA)?This ability is currently not available to individual researchers. Acquisition requests are determined by the requirements of the Copernicus program and ESA/EU member states. ESA does make upcoming acquisition planning available to download and view in Google Earth. More information about ESA’s background planning strategy is available on the ESA Sentinel-1 Observation Scenario web page.

Expand the sections below to view content.  Access the full content on a single page by clicking the button.

User Guide/Technical Information

The Sentinel-1 satellite utilizes a C-band SAR instrument to provide all-weather, day-and-night global coverage every 12 days.

 

Instrument

Instrument information

 

Launches:

  • Sentinel-1B: Soyuz rocket, launched 25 April 2016, from Kourou, French Guiana
  • Sentinel-1A: Soyuz rocket, launched 3 April 2014, from Kourou, French Guiana

Orbit: Polar, sun-synchronous at an altitude of 693 km

Revisit time: Six days with two-satellite constellation of Sentinel-1A and 1B. Before 1B launched, revisit time for Sentinel-1A alone was 12 days.

Instrument: C-band synthetic aperture radar (SAR) at 5.405 GHz

Operational Modes
  • Interferometric wide-swath (IW) at 250 km and 5×20 m resolution, using TOPSAR
  • Wave (WV) images of 20×20 km and 5×5 m resolution (at 100 km intervals)
  • Stripmap (SM) at 80 km swath and 5×5 m resolution
  • Extra wide swath (EW) of 400 km and 20×40 m resolution, using TOPSAR
Polarization
  • Supports operation in single polarization (HH or VV) and dual polarization (HH+HV or VV+VH)
  • Polarization implemented through one transmit chain (switchable to H or V) and two parallel receive chains for H and V polarization
  • SM, IW and EW are available in single (HH or VV) or dual polarization (HH+HV or VV+VH)
  • WV is single polarization only (HH or VV)

Receiving stations: SAR data: Svalbard, Norway; Matera, Italy; Maspalomas, Spain; and via laser link through EDRS (European Data Relay System)

Telemetry, tracking and command: via Kiruna, Sweden

Main applications: Monitoring sea ice, oil spills, marine winds and waves, land-use change, land deformation, and to respond to emergencies such as floods and earthquakes

Mission: Developed, operated, and managed by various ESA establishments

Life: Minimum of seven years

Satellites: 2.8 m long, 2.5 m wide, 4 m high with 2×10 m-long solar arrays and a 12 m-long radar antenna

Mass: 2300 kg (including 130 kg fuel)

Funding: ESA Member States and the European Union Prime contractors: Thales Alenia Space, Italy, for the satellite; Airbus Defence and Space, Germany, for the SAR instrument

Content on ASF’s Sentinel web pages is adapted from the European Space Agency (ESA) Sentinel website.

 

What is TOPSAR?

TOPSAR sub-swath acquisition. Each darker gray region composed of overlapping ovals represents a burst.
TOPSAR sub-swath acquisition. Each darker gray region composed of overlapping ovals represents a burst. By rapidly scanning sections of all sub-swaths in the direction the satellite is traveling, TOPSAR yields more consistent image quality. Figure: De Zan, F., & Guarnieri, A. M. (2006).

Sentinel-1 uses a cutting-edge SAR technique known as Terrain Observation with Progressive Scans SAR (TOPSAR).

TOPSAR enables the Extra Wide Swath (EW) and Interferometric Wide Swath (IW) modes and facilitates interferometric SAR. In these modes, bursts are synchronised from pass to pass to ensure the alignment of interferometric pairs. Interferometry uses more than one image of the same location to detect motion such as land deformation. Examples include studies of volcanoes, earthquakes, and sinkholes.

 

Intended to replace ScanSAR

 

TOPSAR mode is intended to replace the conventional ScanSAR mode, achieving the same coverage and resolution as ScanSAR, but with a nearly uniform Signal-to-Noise Ratio (SNR) and Distributed Target Ambiguity Ratio (DTAR).

Azimuth resolution is reduced compared to ScanSAR mode due to the shorter target illumination time of the burst. Using the sweeping azimuth pattern, each target is seen under the same antenna pattern, independently from its azimuth position in the burst image. By shrinking the azimuth antenna pattern, as seen by a target on the ground, scalloping effects on the image can be reduced. Bursts are synchronized from pass to pass to ensure the alignment of interferometric pairs.

For TOPSAR, the processing must handle the antenna steering rate and the DC rate due to the steering. The azimuth pre- and post-processing of the data must include deramping of the data prior to base-band DC estimation, azimuth ambiguity estimation, and GRD azimuth processing. Please see the technical note COPE-GSEG-EOPG-TN-14-0025 for details on how deramping is performed by the IPF.

TOPSAR azimuth antenna sweeping causes Doppler centroid variations of approximately 5.5 kHz introducing an azimuth phase ramp (azimuth fringes) for small co-registration errors. To correct this, azimuth co-registration is required to be better than 0.001 samples (pixels) in order to obtain phase error less than 3°.

To be useful for generating interferograms, TOPSAR bursts are synchronized between repeat-pass data takes. A burst synchronization of <5 ms is required.

Content on ASF’s Sentinel web pages is adapted from the European Space Agency (ESA) Sentinel Website.

 

 

SAR Modes

Links in the table below open to ESA’s website for more information.

SAR ModeInterferometric Wide Swath (IW)Extra Wide Swath (EW)
DetailsAcquired with TOPSAR. Default mode over land; 250km swath width; 5m-x-20m ground resolution.Acquired with TOPSAR using 5 sub-swaths instead of 3, resulting in lower resolution (20m-x-40m). Intended for maritime, ice, and polar-zone services requiring wide coverage and short revisit times.

Image Quality

Image Quality

 

Users of Sentinel data may see quality issues similar to those below. Users are encouraged to submit examples of image-quality issues to [email protected].

 

Browse images affected by map projection

 

When an image granule is located above 65° latitude, the browse image can appear to be oriented and shaped differently than its outline in Vertex. The browse image is a geocoded JPEG displayed in a polar stereo map projection at latitudes above 65° in either hemisphere. The Vertex map always displays a granule in a Mercator projection. The examples show a Vertex map outline of a granule in the Arctic Ocean and an associated browse image. The browse image also is an example of stepped ends.

Granule MapAscending browse image

Images from data close to the noise floor

 

Images that contain a great deal of noise have often been processed close to the noise floor (the data closest to the point where it is too noisy to be useful). The noise can look like repeating lines across an image, something like horizontal window blinds, as in the left image below. Those repeating lines are not the same as the bright spots in these images, which appear in the image below and to the right as a line of repeated bright spots or bursts. Those bright bursts are image anomalies that are not yet well understood. Also visible in these images are beam seams (see the next section).

Center processing anomalyProcessing anomalies

Beam seams

 

Beam seam anomaly

When one image is made up of several beams, the seams can show, particularly in dark data. Beam seams are visible in many of the images on this page, including the one to the right.

Offsets between channels

 

Offset anomaly

Beams that seem to have noisy or missing data at one end, such as the dark blue edge at the top of the image, have been processed in one channel more than another (such as the HV or VH channels).

Stepped edges

 

Jagged edge anomaly

Stepped ends, as in this image, are an artifact of the multi-beam scanning technology of TOPSAR and the way that ESA “slices” a data take into discrete, manageable units.

Bright burst

 

Bright bursts are processing anomalies that are not well understood. Bright bursts are in the upper left corner of the image below at left and in the light stripe across the image below right. Also visible in the image on the left are noise (window-blind effect), beam seams, and a bit of blue on the far left that may indicate an offset between channels.

Bright burst of light in imageGrayscale image with blue parts

Documents, Tools, and Tutorials

Sentinel-1 Documents

 

NameDescription
Product Specification Document, ASF Defines the ISO-compliant XML metadata for ESA’s Sentinel-­1A data.
Sentinel-1 SAR User Guide IntroductionHigh-level description of instrument modes and products. Also introduction to relevant application areas, information on data distribution, product formatting, and software tools available from ESA.
Sentinel-1 Technical GuideCovers an in-depth description of the mission’s products and algorithms as well as details of the SAR instrument and its performance.
Sentinel High Level Observation Plan, Issue 2, Revision 1Provides the top-level operations plan of the Sentinel missions, including space and ground segments.
Sentinels POD Service File Format SpecificationsUseful for InSAR. Users who consult this document may also want Precision State Vectors, available from ASF from 3 September 2015. The product handbook describes the products generated as part of the provisioning of the Copernicus POD Service.
Sentinel Document LibraryThe full document library is available on the ESA website.

 

Sentinel-1 Tools

 

NameDescription
ESA Sentinel App, for iOS and AndroidPowerful visualization of Sentinel product availability. Track the satellites in real time over a 3D globe, see the last and next time they have been and will be over the user’s location, and more.
HyP3-ISCE2HyP3-ISCE2 is a burst-based Python package for creating burst InSAR products using ASF’s burst SLC products. This Python package can be installed and run locally, or burst InSAR products can be requested through HyP3, ASF’s on-demand processing tool.

 

Sentinel-1 – Tutorials

 

 

Videos

 

 

Tutorials from the ESA Sentinel-1 Toolbox

Note: Tutorial materials that are about sensors other than Sentinel contain material relevant to Sentinel.

Naming Convention

 

The figure below illustrates the Sentinel-1 granule naming convention. For more information, see the Sentinel-1 Technical Guide.

 

sentinel-1 synthetic-aperture radar sar naming-convention diagram showing the number string with each component of the data

 

Orbit Files and Auxilliary Data Files

 

The Precise Orbit Determination (POD) service for Sentinel-1 provides orbit ephemerides files in the form of Precise Orbit Ephemerides files (available 20 days after data acquisition) and Restituted Orbit files (available a few hours after data acquisition). Flight Operation Segment (FOS) Predicted Orbit files (available seven days before data acquisition), Instrument Processing Facility (IPF) auxiliary files, L1 Processor Parameters, L2 Processor Parameters, Instrument, Calibration, and Simulated Cross Spectra Auxiliary Data are also available.

Access to Sentinel-1 ephemeris files and documentation:

 

 

Guide to File Names

 

IPF Auxiliary Data FilesName
L1 Processor Parametersaux_pp1
Calibration Auxiliary Dataaux_cal
Instrument Auxiliary Dataaux_ins
L2 Processor Parametersaux_pp2
Orbit FilesName
FOS Predicted Orbitmpl_orbpre
POD Precise Orbit Ephemeridesaux_poeorb
POD Restituted Orbitaux_resorb
POD Restitude Attitudeaux_resatt

Content on ASF’s Sentinel web pages is adapted from the European Space Agency (ESA) Sentinel website.

Citing Sentinel-1 Data & Imagery

Sentinel-1 Data

 

Cite datasets in publications such as journal papers, articles, presentations, posters, and websites. For more information, see Terms and Conditions. Please send copies of, or links to, published works citing data, imagery, or tools accessed through ASF to [email protected] with “New Publication” on subject line.

TypeFormatExample
Primary DataCopernicus Sentinel data [year of data acquisition]. Retrieved from ASF DAAC [day month year of data access], processed by ESA.Copernicus Sentinel data [year of data acquisition]. Retrieved from ASF DAAC [day month year of data access], processed by ESA.
Modified Data[creator credit, year created], contains modified Copernicus Sentinel data [year of data acquisition], processed by ESA.ASF DAAC 2015, contains modified Copernicus Sentinel data 2015, processed by ESA.

 

Sentinel-1 Imagery

 

Include appropriate credit with each image shown in publications such as journal papers, articles, presentations, posters, and websites.

TypeFormatExample
Primary DataCopernicus Sentinel data [year of data acquisition], processed by ESA.Copernicus Sentinel data 2015, processed by ESA.
Modified Data[creator credit, year created], contains modified Copernicus Sentinel data [year of data acquisition], processed by ESA.ASF DAAC 2015, contains modified Copernicus Sentinel data 2015, processed by ESA.

 

Sentinel legal notice with Terms and Conditions

 

European Space Agency Legal Notice on the Use of Copernicus Sentinel Data and Service Information

 

The access and use of Copernicus Sentinel Data and Service Information is regulated under EU law.1 In particular, the law provides that users shall have a free, full and open access to Copernicus Sentinel Data2 and Service Information without any express or implied warranty, including as regards quality and suitability for any purpose.3

EU law grants free access to Copernicus Sentinel Data and Service Information for the purpose of the following use in so far as it is lawful4 :

(a) reproduction;

(b) distribution;

(c) communication to the public;

(d) adaptation, modification and combination with other data and information;

(e) any combination of points (a) to (d).

EU law allows for specific limitations of access and use in the rare cases of security concerns, protection of third party rights or risk of service disruption.

By using Sentinel Data or Service Information the user acknowledges that these conditions are applicable to him/her and that the user renounces to any claims for damages against the European Union and the providers of the said Data and Information. The scope of this waiver encompasses any dispute, including contracts and torts claims, that might be filed in court, in arbitration or in any other form of dispute settlement.

Where the user communicates to the public or distributes Copernicus Sentinel Data and Service Information, he/she shall inform the recipients of the source of that Data and Information by using the following notice5 :

  1. ‘Copernicus Sentinel data [Year]’ for Sentinel data; and/or
  2. ‘Copernicus Service information [Year]’ for Copernicus Service Information.

Where the Copernicus Sentinel Data and Service Information have been adapted or modified, the user shall provide the following notice:

  1. ‘Contains modified Copernicus Sentinel data [Year]’ for Sentinel data; and/or
  2. ‘Contains modified Copernicus Service information [Year]’ for Copernicus Service Information.

The users’ rights on their personal data are protected under European law6. Such data will only be used by the European Commission and the providers of the said Data and Information for providing services to the user and for statistical as well as evaluation purposes.

1 Regulation (EU) No 377/2014 and Commission Delegated Regulation (EU) No 1159/2013.
2 In agreement with the Copernicus Sentinel Data Policy, ESA/PB-EO(2013)30, rev. 1.
3 See in particular Art. 3 and 9 of Regulation 1159/2013.
4 See in particular Art. 7 of Regulation 1159/2013.
5 See in particular Art. 8 of Regulation 1159/2013.
6 Directive 95/46/EC of the European Parliament and of the Council of 24 October 1995 on the protection of individuals with regard to the processing of personal data and on the free movement of such data; Regulation (EC) No 45/2001 (EC) No 45/2001 of the European Parliament and of the Council of 18 December 2000 on the protection of individuals with regard to the processing of personal data by the Community institutions and bodies and on the free movement of such data.

Discover Sentinel-1 data

 

Alaska Satellite Facility (ASF) DAAC

ASF maintains a complete mirror of the ESA Sentinal-1 archive. An account with the NASA Earthdata Login system is required.
Sentinel-1 data from ASF are also discoverable using NASA Earthdata Search. An account with the NASA Earthdata Login system is required.

 

European Space Agency (ESA)

Sentinel-1 data are available from ESA through the Copernicus Data Space Ecosystem. Registration is required.

 

Learn how to search and download data from ASF using ASF Data Discovery services
Data Discovery ToolLink
ASF Vertex Data SearchVertex
Python Search Moduleasf_search
ASF Search APIASF Search API
NASA Earthdata SearchEarthdata Search

 

Sentinel-1 products can also be directly accessed from AWS

Note: Access is available IN REGION only

DatasetAWS RegionBucket/Object Prefix – PRODUCTSAuthenticationDocumentation
Sentinel-1US-WEST-20Get AWS S3 Credentials README file